guidefast

Economical energy supply for crane girders and indoor cranes -
quickly installed as a modular kit solution

The guidefast guide trough is mounted on the side of the crane carriage. In case of installation on crane girders one can omit the welding of brackets. Installation times are kept very short, as the guide trough only needs to be mounted in the previously fixed brackets and then fixed with the clamping blocks. The small amount of various components and the fixed trough width also contribute to a simple installation.

Fast and simple fastening by means of clamping rails

Single-part steel trough with 2 m standard length

Abrasion-resistant: gliding bar for center-mounted feed

Guide trough segments are connected with clips, avoiding misalignment

Clever: 2 version retainer with integrated strain relief

Save up to 80% installation time compared to standard trough systems

Fits into nearly any standard crane girder

2 versions of brackets with integrated strain relief for assembly of static cables on the crane girder ± 5mm vertical tolerance of the brackets

For the standard trough length of 2.0m - with or without glide bar

Suitable for any side-mounted application - not only on cranes

Easy to install due to hole patterns on e-chain® brackets

Standard material: galvanised steel. Also available in stainless steel. Material 1.4301 (AISI 304) or black powder coated

Conductivity according to DIN EN 61537: as standard with special connector

Long-term tested to withstand vibration and tough environments

Components - Holder set
A - Version 01 - short holder
B - Version 02 - long holder
C - Clamp blocks, part no. GF9.2.10

Ba = e-chains® outer width
Bi = e-chains® inner width
ha = e-chains® outer height
BRi = trough inner width = BRi ≥ Ba + 4

2 versions: holder with integrated strain relief:
A - Version 01 - short holder
B - Version 02 - long holder

Components - guidefast Set1. Trough profile, 2 m each
2. Plastic glide bar, 2 m each, optional
3. Clip, Part No. 908.467

Guide troughs

Standard length: 2000 mm

Standard material: Galvanized steel

Each element has one opening for cable feed

Version with installed glide bars is also available

Different part number according to size - please see details in the table below

Width [mm]:

Part number	For e-chains®:	with or without	Inner width trough	A	B
		Glide bar	BRi [mm]	[mm]	[mm]
GF91.30.025.2000	1500.025.RRR.0	without glide bar	42.5	61	81	208.96 AUD
GF91.30.050.2000	1500.050.RRR.0	without glide bar	67.5	61	106	212.27 AUD
GF92.30.03.2000	E2.26.038.RRR.0 \| 2500.03.RRR.0	without glide bar	58	75	97	236.93 AUD
GF92.30.05.2000	E2.26.057.RRR.0 \| 2500.05.RRR.0	without glide bar	77	75	115.5	239.10 AUD
GF92.30.07.2000	E2.26.077.RRR.0 \| 2500.07.RRR.0	without glide bar	97	75	135.5	240.75 AUD
GF92.30.09.2000	2500.09.RRR.0	without glide bar	109	75	148	241.74 AUD
GF92.30.10.2000	2500.10.RRR.0	without glide bar	123	75	161.5	242.47 AUD
GF95.30.05.2000	E2.38.050.RRR.0 \| 2700.05.RRR.0	without glide bar	70	105	108.5	242.47 AUD
GF95.30.07.2000	E2.38.075.RRR.0 \| 2700.07.RRR.0	without glide bar	95	105	133.5	255.83 AUD
GF95.30.10.2000	E2.38.100.RRR.0 \| 2700.10.RRR.0	without glide bar	120	105	158.5	256.72 AUD
GF91.31.025.2000	1500.025.RRR.0	with glide bar	42.5	61	81	338.21 AUD
GF91.31.050.2000	1500.050.RRR.0	with glide bar	67.5	61	106	341.52 AUD
GF92.31.03.2000	E2.26.038.RRR.0 \| 2500.03.RRR.0	with glide bar	58	75	97	427.82 AUD
GF92.31.05.2000	E2.26.057.RRR.0 \| 2500.05.RRR.0	with glide bar	77	75	115.5	368.35 AUD
GF92.31.07.2000	E2.26.077.RRR.0 \| 2500.07.RRR.0	with glide bar	97	75	135.5	370.07 AUD
GF92.31.09.2000	2500.09.RRR.0	with glide bar	109	75	148	432.59 AUD
GF92.31.10.2000	2500.10.RRR.0	with glide bar	123	75	161.5	371.72 AUD
GF95.31.05.2000	E2.38.050.RRR.0 \| 2700.05.RRR.0	with glide bar	70	105	108.5	371.72 AUD
GF95.31.07.2000	E2.38.075.RRR.0 \| 2700.07.RRR.0	with glide bar	95	105	133.5	385.12 AUD
GF95.31.10.2000	E2.38.100.RRR.0 \| 2700.10.RRR.0	with glide bar	120	105	158.5	385.94 AUD

More about selected part:

3D-CAD

Quote request

myCatalog

Bracket short version

Delivery including clamping block and screw

Clamping block, incl. conductivity - available as per DIN EN 61537: Standard

Few fastening options for permanently laid cables, therefore more space-saving than the long version

Standard support interval: 1 bracket per meter

Article number
GF9.2.12	guidefast, short version support – standard clamping block	30.17 AUD
GF9.2.12.CD	guidefast, short version support - clamping block with conductivity	144.34 AUD